Category
Stock Code
Digi Test II – Digital Durometer
Digi Test II – Digital Durometer | IRHD Shore Hardness Tester
The Bareiss Digital Durometer – digi test II shore hardness tester is a fully automated hardness testing instrument used to measure Shore, Micro, IRHD (international rubber hardness degree), and VLRH (very low rubber hardness) on a variety of elastomers, foam material. Our digital durometer advanced materia testing instrument the highly intelligent digi test II shore hardness tester is equipped with an electronic unit which serves as the main control of the entire system and the display of the user’s information for measuring time, method measurement, and various selectable features. Unlike the conventional hardness testers which are limited to only flat-surfaced samples, measuring with the Bareiss digi test II shore hardness tester allows hardness testing on convex and concave surfaces by using the automatic surface detection technology. In addition to that, we can customize our indenter length so that it can reach any point on the sample which is required for measuring. Bareiss offers a wide range of standard sample holders and positioning devices, but we also specialize in customizing holders for your particular products.
The unique digi test II and its predecessors have convinced the world since 1972, with their modular design and facile operation. Whether a standard specimen or a thin-walled specimen – the digi test II offers a suitable hardness testing solution for any kind of specimen. For more than 45 years, the Bareiss’s hardness testing technologies have impressed with its interchangeable probe system for hardness testing of different elastic materials and shapes. The specimen preparation and positioning are equally important. Therefore, Bareiss offers a wide selection of off-the-shelf sample fixtures as well as custom solutions. The user influences are minimized through the automatic testing sequence. A calibration according to DAkkS / DIN ISO 17025 is possible either at your place of business, on-site, or in our laboratory
Digi Test II – Digital Durometer | IRHD Shore Hardness Tester Description
Application
Digi Test II – Digital Durometer | IRHD Shore Hardness Tester Technical Data
Digi Test II – Digital Durometer | IRHD Shore Hardness Tester Image
Product features and benefits
1) User-Friendly: This automatic shore hardness tester is equipped with an electronic unit that can show user information, time, and method of measurement, and is equipped with various other configurations along with automatic measurement of time and range detection.
2) Range of Measurement: This Automatic hardness testing machine can measure the hardness of O rings, seals, rubbers, and plastics by making use of special measuring devices for which the fixtures can also be customized according to the sample that is to be tested.
3) Mechanism: The measuring devices have an easy plug-and-play solution with no complex mechanism. The measuring devices can easily be fastened by hand using the knurled nut and the electronic unit can easily detect the device once it is set up.
4) Complexity: Concave and convex samples can easily be tested for their shore hardness using the special measuring devices developed by Bareiss.
5) Special Features: The hysteresis function is available in Micro, IRHD and VLRH methods, providing a better understanding of the results for further analysis.
7) Integrable in an automatic production process.
| Shore A | Shore E |
| Shore D | Shore M |
| Shore B | Micro Shore D |
| Shore 0 | IRHD N |
| Shore 000 | IRHD H |
| Shore A0 | Micro Shore A |
| Shore D0 | IRHD L |
| Shore C | Shore AM |
| Shore 00 | IRHD M |
| Shore 000S | VLRH |
Application
| Test Method | Range of Application | Standard | Minimum material thickness [mm] | Mode |
|---|---|---|---|---|
| Shore A | soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, pressure rollers, etc | DIN EN ISO 868 | 4 | Standard Std. Graph |
| DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A 26 | 6 | |||
| Shore B | middle hard materials from rubber, typewriter roles, flat materials | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore 0 | soft elastic materials, pressure rolls, middle firm, textile fabrics, nylon, orlon, perlon, rayon | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore A0 Shore E | Soft foam, leather covers | DIN ISO 7619 ASTM D 2240 |
6 | Standard Std. Graph |
| M Shore A M Shore A/B/0 | Shore A | Bareiss Standard | 1.5 | Standard Std. Graph |
| Shore D | hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, cellulose- Acetate, etc. | DIN EN ISO 868 | 4 | Standard Std. Graph |
| DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A 26 |
6 | |||
| M Shore D/C/D0 | Shore D 0,5 Molded parts | Bareiss Standard | 1 | Standard Std. Graph |
| Shore C | plastics and middle hard rubber materials | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore D0 | plastics and middle hard rubber materials | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore 00 | sponge- and foam rubber, cellular rubber, silicone | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore 000 | sponge- and foam rubber, cellular rubber, silicone | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore 000 S | sponge- and foam rubber, cellular rubber, silicone | ASTM D 2240 | 6 | Standard Std. Graph |
| Shore AM/M | Shore A | DIN ISO 7619 ASTM D 2240 |
1.5 | Standard Std. Graph |
| IRHD M | Thin-walled O-rings, molded parts, norm plates | DIN ISO 48 ASTM D 1415 |
1 | Standard Std. Graph Hysteresis |
| IRHD H | Shore D | DIN ISO 48 ASTM D 1415 |
6 | Standard Std. Graph Hysteresis |
| IRHD N | Soft rubber, high elastic materials, plastic ductile materials | DIN ISO 48 ASTM |
6 | Standard Std. Graph Hysteresis |
| IRHD L | Moss- and cell rubber, foam rubber, silicone | DIN ISO 48, ASTM D 1415 |
10 | Standard Std. Graph Hysteresis |
| VLRH | Moss- and cell rubber, foam rubber, silicone | DIN ISO 27588 DIN ISO 48-3 |
2 | Standard Std. Graph Hysteresis |
Digi Test II – Digital Durometer | IRHD Shore Hardness Tester Technical Data
| Test Method | Spring Force (mN) | Indenter | Measuring distance (mm) | Total weight | Additional weight |
| Shore A | 8050 | 350 | 2.5 | 1kg | - |
| Shore AM/M | 764 | 300 | 1.25 | 250g | - |
| Shore E | 8050 | Ø 5mm | 2.5 | 1kg | - |
| Shore A0 | 8050 | Ø 5mm | 2.5 | 1kg | - |
| L/Lc | 8050 | Ø 5mm | 2.5 | 1kg | - |
| Shore D | 44450 | 300 | 2.5 | 5kg | 0.250 g |
| 3.75 kgs | |||||
| Shore B | 8050 | 300 | 2.5 | 1kg | - |
| Shore C | 44450 | 350 | 2.5 | 5kg | 0.250 g |
| 3.75 kgs | |||||
| Shore D0 | 44450 | 3/320 | 2.5 | 5kg | 0.250 g |
| 3.75 kgs | |||||
| Shore 0 | 8050 | 3/320 | 2.5 | 1kg | - |
| Shore 00 | 1111 | 3/320 | 2.5 | 400g | - |
| Shore 000 | 1111 | r= 6.35mm | 2.5 | 400g | - |
| Shore 000 S | 1932 | r= 10.7 | 5.0 | 400g | - |
| M Shore A | 108 | 300 | 1 | 23.5g | - |
| M Shore D | 9213 | 300 | 0.5 | 500g | - |
| IRHD M | 153.3 | Ø 0.4mm | 0.3 | 235mN | - |
| IRHD N | 5.7N | Ø 2.5mm | 1.8 | 8.3N | - |
| IRHD H | 5.7N | Ø 1.0mm | 0.44 | 8.3N | - |
| IRHD L | 5.7N | Ø5.0mm | 2.1 | 8.3N | - |
| VLRH | 100 | Ø 2.5mm | 1 | 235mN | - |
Digi Test II – Digital Durometer | IRHD Shore Hardness Tester Image
