Stock Code
0560 6160
TESTO Moisture Meter for Wood and Building Materials | 616
testo 616 moisture meter with 10 characteristic curves
Delivery Scope
The testo 605-H1 thermohygrometer enables reliable measurement of humidity and air temperature and calculation of the dew point. It has a permanently mounted probe shaft which means it is excellent when it comes to carrying out check measurements in ventilation ducts.
Your advantages
- Measures the moisture content of wood and building materials quickly and reliably
- Non-destructive, precise measurements up to a material depth of 5 cm
- 10 characteristic curves for different types of building material and wood
- Backlit display, hold function, min/max memory, ergonomic design
TESTO Moisture Meter for Wood and Building Materials | 616 Description
The testo 616 professional moisture meter provides you with a precise and non-destructive means of measuring the moisture content of wood and building materials and of monitoring the drying process after water damage. Simply select the characteristic curve and place the meter’s measuring claw against the surface of the material you would like to measure. The meter shows you the moisture content as a weight percentage compared to the dry weight. Press the relevant key to save the reading to your meter.
Although the measuring claw only comes into contact with the surface, wall or flooring that is being measured, it is able to determine the moisture content of the wood or other material down to a depth of 5 cm.
Ideal areas of use for the testo 616 moisture meter
The testo 616 moisture meter is a professional measuring device that can be used in areas as diverse as water damage restoration or carpentry or joinery.
- Moisture damage detection: the non-destructive method for finding moisture in walls and floors
- Monitoring drying processes: from carrying out moisture inspections to meeting building schedules to controlled drying after water damage – the non-destructive method for determining the moisture content in wood and building materials
- Moisture in wood: for checking the moisture content of wood that has been stored prior to processing
testo 616 moisture meter with 10 characteristic curves
- Soft wood
- Hard wood
- Pressboard
- Anhydrite screed
- Cement screed
- Lime sand brick
- Gas concrete
- Concrete
- High insulation bricks
- Brickwork
Delivery Scope
testo 616 moisture meter for wood and building materials, calibration protocol, batteries.
TESTO Moisture Meter for Wood and Building Materials | 616 Technical Data
General technical data
Humidity - Capacitive
TESTO Moisture Meter for Wood and Building Materials | 616 Image
General technical data
| Dimensions |
70 x 58 x 234 mm
|
|---|---|
| Operating temperature |
+5 to +40 °C
|
| Product-/housing material |
ABS / TPE / Metal
|
| Protection class |
IP30
|
| Battery type |
9V block battery, 6F22
|
| Battery life |
60 h
|
| Display update |
0.5 s
|
| Unit |
Water content in percent by weight based on dry mass (%)
|
| Measurement depth |
up to 5 cm
|
| Measuring rate |
0.5 s
|
| Storage temperature |
-20 to +70 °C
|
| Weight |
260 g
|
Humidity - Capacitive
| Measuring range |
< 50 % (wood)
< 20 % (building materials)
|
|---|---|
| Resolution |
0.1
|
TESTO Moisture Meter for Wood and Building Materials | 616 Image